RCVD V-shaped Condensers

High-capacity condensation with minimal lateral footprint.

The V-shape solution for large-scale systems requiring maximum efficiency and compactness

High ambient temperatures, continuous operating cycles, and increasingly demanding thermal loads rapidly expose the limitations of traditional condensers. Large-scale industrial systems require a solution that maintains stable condensation even under unbalanced loads or when outdoor air temperatures reach critical thresholds.

The RCVD series is engineered to tackle these conditions leveraging a double-row V geometry (double-row V-bank) that guarantees a large heat transfer surface within a compact footprint. Two independent refrigerant circuits and optimized air distribution ensure operational continuity even under variable loads, backed by a wide range of configurations selectable according to project technical data.

Application Sectors

Food & Beverage
Air conditioning
Grocery Retail
Distribution Centers

Advantages of V-shaped Condensers

Higher heat dissipation capacity in restricted spaces: Thanks to the double-row V-shaped configuration that concentrates a large heat transfer surface within a compact footprint, facilitating integration onto technical rooftops.
Condensation stability even during peak loads: Thanks to inner-grooved copper tubes and corrugated fins that maintain high heat transfer performance even at reduced airflow rates, improving cycle consistency.
Quieter operation: Thanks to 800–910 mm external rotor fans and optimized fan shrouds that reduce the required fan speed, achieving lower acoustic levels.
High long-term reliability: Thanks to the coil suspension system that prevents direct contact between the core and the casing, reducing the risk of micro-leaks.
Operational continuity during partial shutdowns: Thanks to internal separator baffles that prevent air recirculation and maintain a uniform airflow across the heat transfer surface.
Flexibility in refrigerant selection: Thanks to full compatibility with HFC, HFO, and NH3 fluids, and the availability of numerous configurations that streamline the design of both new installations and retrofit projects.

Technical Specifications and Models

Condensing capacity : 290 – 2,200 kW (EN 327 conditions)
Fans: 4–16 units
Fan diameters: 800 / 910 mm, AC o EC, IP54, class F
Fin spacing: 2,1/2,3/2,5/3,2/4,0 mm
Compatible refrigerants: HFC – HFO – NH₃
Operating Pressures / Temperatures: PS 30 bar (40 bar per R410A) | TS –40 / +120 °C
Installation: horizontal
Number of models: over 70 configurations

Options and customization

AISI 304 / 316L stainless steel casing
Stainless steel tubes and fins
Fins in copper, pre-painted aluminum or flat
High efficiency EC fans
ATEX fans
Special high-pressure fans
Coil protective coating
Fans Speed controllers
Anti-vibration mounts
Fan isolators switches (disconnectors)
AC/EC fans wiring

Warranty and compliance

Warranty: 24 months from date of shipment
Compliant with:
- PED 2014/68/EU
- Machinery Directive 2006/42/EC
- Low Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU

Data sheet

Air coolers and condensers for distribution platform

Kragola

For this huge project the main target was to achieve the highest global COP of the refrigerating plant.

Unit coolers and condensers for logistics center

Mosciano

For this project, we have supplied air coolers and low temperature CO2 evaporators that were installed in cold rooms for storage of fresh and frozen food.

Air coolers and condensers for logistics center

Murmansk

For this project, we have supplied air coolers and low temperature freon evaporators that have been installed in cold rooms for storage of fresh and frozen food.