RCVM-PAD Adiabatic Pad Condensers

Maximum condensing power, compact design, and advanced PAD systems. The V-shaped adiabatic-evaporative solution to manage peaks without oversizing the condenser Managing thermal peaks is one of the most critical aspects of ensuring continuous condensation. On days when ambient temperatures remain consistently high, systems risk losing operational margins: dry operation alone cannot always guarantee a sufficient […]

RCVM-AD Adiabatic Spray Condensers

Stable condensation at thermal peaks with compact Footprint. The adiabatic spray solution to increase capacity without oversizing the system Days with high thermal loads quickly put condensers installed on compact or unshaded rooftops under severe pressure. In these contexts, the incoming hot ambient air reduces the useful margin for heat transfer, causing condensing temperatures to […]

RCHV Microchannel Condensers

High-efficiency condensation with an ultra-compact footprint. The compact microchannel solution for systems requiring high capacity, refrigerant savings, and modularity In many modern refrigeration systems, the primary constraint is not available capacity, but the physical space to install it: rooftops crowded with technical equipment, narrow service pathways, and the need for units that seamlessly pair with […]

RCVD V-shaped Condensers

High-capacity condensation with minimal lateral footprint. The V-shape solution for large-scale systems requiring maximum efficiency and compactness High ambient temperatures, continuous operating cycles, and increasingly demanding thermal loads rapidly expose the limitations of traditional condensers. Large-scale industrial systems require a solution that maintains stable condensation even under unbalanced loads or when outdoor air temperatures reach […]

RCVM V-shaped Condensers

Efficient condensation and narrow width for mid-to-high capacity systems. The compact V-shape solution to maximize efficiency where lateral space is limited Restricted lateral spaces, rooftops crowded with technical units, and obstructed airflow paths make it complex to integrate condensers into refrigeration and air conditioning systems. In these contexts, the main challenge is not so much […]

RCVS V-shape Condensers

Efficient condensation and low profile for acoustically and visually sensitive sites. The compact V-shape solution to balance high capacity and low noise Installations in urban areas, visually exposed rooftops, and contexts with strict acoustic limitations require condensers capable of combining high thermal capacity with architectural discretion. When the unit profile is too high, installation becomes […]

RCSD–RCLD Flatbed Condensers

Stable condensation and optimized footprint for high-capacity systems. Short or long casing to balance efficiency, airflow, and installation constraints Condensing temperatures that spike rapidly during peak hours, airflow disrupted by barriers and parapets, and sudden fluctuations in cooling loads: these conditions put severe pressure on condensers, especially in high-capacity systems. When the condensing temperature is […]

Flat condensers RCS – RCL

Stable condensation with HFC/HFO even with variable loads and limited spaces. Flat condensers with short/long frame to adapt to any installation constraints High temperatures, limited roof space and acoustic constraints make it increasingly difficult to maintain stable condensation in commercial refrigeration and HVAC systems. Under these conditions, the condenser is subject to variable thermal loads […]